electronica 2026: 6 Embedded Launches Worth an Engineer’s Attention

By IoTAdda Desk ·

Development boards, a motor-control board with a small motor and a wireless module on a white table in a bright exhibition hall

Key takeaways

  • Renesas RZ/T2N puts four-axis motor control, four Arm cores and three Gigabit Ethernet MACs on one chip, available now.
  • Infineon’s AURIX RC1, its first RISC-V MCU platform, scales to 12 cores and 40 MB of memory; samples are due in H1 2027.
  • ST’s STM32G5 runs a Cortex-M33 at 280 MHz and is in production from $1.034 (about ₹97) at 10,000 units.

electronica 2026 ran in Munich from 10 to 13 November, and the silicon launched around it shared one theme: real-time control. Motor drives, robot joints and industrial Ethernet got the new chips, and RISC-V moved into named product families. We checked each launch against the vendor’s own release.

1. Renesas RZ/T2N: four-axis motor control on one MPU

Announced on 5 November and demonstrated at the show, the RZ/T2N pairs two Cortex-A55 cores (up to 1.2 GHz) with two Cortex-R52 real-time cores (up to 800 MHz) and motor-control hardware for up to four axes. It adds three Gigabit Ethernet MACs, a switch, an EtherCAT SubDevice Controller and TSN. The chip and its evaluation board are available now. Best for multi-axis servo drives and small robot arms.

2. ST STM32G5: a faster mixed-signal MCU for power and drives

Launched at ST’s STM32 Summit on 4 November, the week before Munich, the STM32G5 runs a Cortex-M33 at up to 280 MHz (1,136 CoreMark) with a 111 ps high-resolution timer and post-quantum cryptography readiness. ST says it is in production from $1.034 in 10,000-unit orders, with dual-core parts in 2027. Best for digital power and motor drives.

3. ST STM32H7P: DSP and an NPU beside the control loop

The STM32H7P pairs a 520 MHz Cortex-M7 with a DSP accelerator and, on selected parts, an 85 GOPS Neural-ART NPU. It offers up to 2 MB of flash and runs at up to 125 °C ambient in exposed-pad packages. Best for solar inverters and condition monitoring, where inference sits beside the control loop.

4. Infineon AURIX RC1: RISC-V arrives in automotive MCUs

Announced on 4 November and shown as a family concept at electronica, AURIX RC1 is Infineon’s first RISC-V microcontroller platform, merging the AURIX and TRAVEO T2G lines. Infineon says devices will reach 12 32-bit cores, an edge-AI parallel processing unit and 40 MB of embedded memory, with CAN XL, 10BASE-T1S and ASIL D support. Samples are targeted for H1 2027, so treat it as a roadmap item for future zone and battery-management controllers.

5. MIPS Actus: a RISC-V platform for robot joints

MIPS, a GlobalFoundries business, showed its Actus reference platform on 9 November: two Atlas M8500 real-time RISC-V cores, field-oriented-control acceleration that MIPS claims is over 16 times faster than standard libraries, 100 ps-class PWM and Gigabit Ethernet with three-port TSN, on GF’s FDX process with MRAM. No availability date was given. Best for teams designing robot-joint silicon.

6. TI TICS100MOD: one module, three industrial Ethernet protocols

TI’s 5 November launch is a system-on-module built on its AM2612 MCU (two Cortex-R5F cores) that switches between EtherCAT, EtherNet/IP and PROFINET at boot by firmware. It is due by year-end 2026; the companion TIOM2212 IO-Link master is in preproduction. Best for drive and sensor makers selling into several PLC ecosystems.

Also at the show

  • Nordic nRF71: Wi-Fi 6 and Bluetooth LE on one chip; the nRF7120E adds 6 GHz and an Axon NPU. Early sampling only.
  • Arduino Nano XL Link: a Nano-size Microchip PIC32CK Cortex-M33 board with CAN FD, RS-485 and Ethernet.

At a glance

Chip Vendor What’s new Best for
RZ/T2N Renesas 2× A55 + 2× R52, four-axis motor control, 3× GbE, EtherCAT; available now Multi-axis servo drives, robot arms
STM32G5 STMicroelectronics Cortex-M33 at 280 MHz, 111 ps timer; in production, from $1.034 (≈₹97) at 10k Digital power, motor drives
STM32H7P STMicroelectronics Cortex-M7 at 520 MHz, DSP accelerator, 85 GOPS NPU on selected parts Solar inverters, condition monitoring
AURIX RC1 Infineon First RISC-V AURIX; up to 12 cores, 40 MB memory; samples H1 2027 Future automotive zone and BMS controllers
Actus MIPS (GlobalFoundries) Dual Atlas M8500 RISC-V, FOC acceleration, 3-port TSN; no date Robot-joint actuators
TICS100MOD Texas Instruments AM2612-based SoM; EtherCAT, EtherNet/IP, PROFINET by firmware; by end-2026 Drives, sensors, I/O for several PLC ecosystems

INR at ₹93.70/$ (PTI, 11 November 2026), before duty and GST. Performance figures are vendor claims.

Why it matters for India

For Indian servo-drive, VFD and solar-inverter makers, the parts to sample now are the STM32G5 and RZ/T2N, because both are shipping; AURIX RC1 and Actus are 2027-and-later silicon that fits an EV Tier-1’s next platform, not this year’s BOM.

TI’s module is the quiet win for Indian automation exporters, who often build separate EtherCAT, PROFINET and EtherNet/IP variants for different overseas customers. Ask your Indian distributor for local stock and lead times before design-in.

Our view

electronica 2026 showed that the motor-control MCU is now the most contested socket in embedded. Every vendor here led with deterministic control, fine-grained PWM and industrial Ethernet, and added the NPU second. Indian teams should read that correctly: the design wins will go to engineers who can close a current loop, run EtherCAT or TSN and pass a safety audit, not to those who can only deploy a model. And with Infineon putting RISC-V under the AURIX name, every Indian automotive supplier needs a RISC-V toolchain plan within two years.

Related reading

Sources

Representative image, AI-generated.

  • electronica 2026
  • Industrial Ethernet
  • Infineon AURIX
  • Microcontrollers
  • Motor Control
  • Renesas
  • risc-v
  • stm32

Related articles