Abracon Releases Hybrid LTE Cat-M / GNSS Puck Antenna with Built-In Anti-Jamming Filtering

By IoTAdda Desk ·

Abracon Releases Hybrid LTE Cat-M / GNSS Puck Antenna with Built-In Anti-Jamming Filtering

The AANE-PU-0121 integrates cellular and satellite tracking in a single IP67 enclosure, solving a persistent LTE-GNSS co-existence problem in compact IoT hardware

Abracon, a Texas-based manufacturer of RF, frequency control, and connectivity components, has released the AANE-PU-0121 — a new adhesive-mount puck antenna that combines LTE Cat-M / NB-IoT cellular and multi-constellation GNSS support in a single housing. The product targets asset trackers, telematics units, smart meters, and industrial IoT deployments that require both data and location in a rugged, field-deployable form factor.

The LTE-GNSS Interference Problem

LTE Cat-M and NB-IoT are low-power cellular technologies designed for massive IoT deployments requiring long battery life and deep coverage. Most LTE Cat-M modules integrate GNSS for location-aware applications, driving demand for a compact LTE + GNSS combo antenna that reduces size, cost, and installation complexity.

The design challenge is a well-known one in RF engineering: strong LTE signals, especially Band 12 and Band 13, generate second harmonics that sit squarely in the GNSS L1 band. The common workaround — using two separate antennas — adds BOM cost, PCB space, and installation complexity, all of which cut against the constraints of compact IoT hardware.

What Abracon Has Built

The AANE-PU-0121 addresses this with integrated pre-filtering built directly into the antenna assembly — not pushed downstream to the module — which means interference is attenuated before it reaches the GNSS receiver. Housed in a compact 59.5 × 52.5 × 16.5 mm IP67 enclosure, it delivers high LTE efficiency (up to 76%) and a high-gain GNSS LNA (28 dB) for enhanced sensitivity.

This approach mirrors what Abracon uses in its standalone anti-jamming GNSS patch antenna line — a SAW-LNA-SAW configuration positioned directly after the GNSS ceramic patch antenna, combining proven low-loss, high-rejection SAW filter technology with integrated low-noise amplification to effectively mitigate high-power LTE and Wi-Fi interference.

Specifications

Parameter Detail
Model AANE-PU-0121
Dimensions 59.5 × 52.5 × 16.5 mm
LTE Frequency Range 698–960 MHz, 1710–2690 MHz
GNSS Frequency Range 1563–1610 MHz
LTE Peak Gain 7.1 dBi (low band), 6.9 dBi (high band)
GNSS Peak Gain 3.6 dBi
LTE Efficiency Up to 76%
GNSS LNA Gain 28 dB
Current Consumption Down to 15 mA
IP Rating IP67
Mount Adhesive
Cable 1 m standard, fully customizable
Connector SMA (M) or FAKRA, customizable
Standards LTE Cat-M, NB-IoT, GNSS (multi-constellation)

 

Target Applications

The antenna is suited to asset tracking and logistics, where equipment needs to transmit location over cellular as it moves across regions. Other target applications include smart cities (smart meters and grid monitoring), infrastructure (traffic control and environmental sensors), and industrial IoT such as telematics control units and rugged computers. Security, remote alarms, agricultural monitoring, and healthcare devices round out the application list.

Why It Matters for IIoT Designers

As LTE Cat-M and NB-IoT deployments scale — particularly in smart utilities, supply chain tracking, and industrial remote monitoring — the need for compact, pre-validated antenna hardware that resolves RF co-existence issues at the component level becomes more valuable. For engineers working on IoT hardware where BOM count and RF co-existence are both constraints, a pre-filtered combo antenna like this is worth evaluating before specifying two separate antennas.

The AANE-PU-0121 is listed as in stock soon on Abracon’s website. Current draw is down to 15 mA — viable for battery-powered deployments. Cable length and connector type (SMA or FAKRA) are fully customizable.

  • abracon
  • antenna
  • asset tracking
  • Embedded Systems
  • GNSS
  • IIoT
  • IoT hardware
  • lte-cat-m
  • NB-IoT
  • rf-design
  • Smart Metering
  • telematics

Related articles