
Cypress introduces new Energy Harvesting Evaluation Kit on Mouser
- Hrishikesh
- June 2, 2017
- Boards, Internet of Things
- Cypress, evaluation kits, IoT, Mouser
- 0 Comments
user Electronics, Inc. is now shipping the CYALKIT-E04 S6AE102A and S6AE103A evaluation kit (EVK) from Cypress Semiconductor.
Cypress Semiconductor CYALKIT-E04 S6AE102A & S6AE103A Evaluation Kit allows for developing battery-free applications with an energy harvesting device. The kit has an S6AE102A board, S6AE103A board, sensor board with a solar module, wires, and a battery for testing configurations. The kit can be used as a stand-alone device or in conjunction with the CY8CKIT-042-BLE Bluetooth Low Energy Pioneer kit. Use with the CY8CKIT-042 to demonstrate and develop applications that power a BLE device using harvested energy.
Features
- The S6AE102A/103A boards support the following:
- Selecting the mode (Energy-driven mode / Event-driven mode 1 / Event-driven mode 2, Timer-driven mode) using a switch
- Charging the surplus solar energy to a 0.33-F super capacitor
- Reset button for S6AE102A/S6AE103A
- LEDs for status
- Test pin header for ground
- The sensor board supports the following:
- Expansion board for sensor/battery input
- Magnetic door sensor (reed switch)
- Ambient light sensor
- Reference schematic, BOM list, and layout for easy design.
- Sample firmware for CY8CKIT-042-BLE to work with EVK
Kit Contents
- S6AE102A board, which uses the following Cypress device:
- Solar-optimized energy harvesting power management IC S6AE102A
- S6AE103A board, which uses the following Cypress device:
- Solar-optimized energy harvesting power management IC S6AE103A
- Sensor board (magnetic door sensor, light sensor)
- Series Solar Module (Panasonic AM-1801)
- Coin battery (CR2032)
- Two jumper wires
- Quick Start Guide
INR 4000 in India
More information HERE.